Customized Cell Holder Shell

Tinheo Molding has been focusing on the prototyping industry for 20 years, focusing on providing new energy companies with the customization of battery cells, lithium batteries, power batteries, new energy vehicle battery boxes and other accessories. With advanced equipment and many years of rich experience, Tinheo Molding is your first choice A professional lithium battery prototype customization manufacturer, welcome to customize drawings.

A battery box is a battery pack composed of several single cells, boxes, battery management systems and related installation structures (equipment). It has a standard battery box structure, battery box monitoring equipment, battery box connectors, and battery boxes. Environmental control equipment, etc.

The cell holder shell is customized using a vacuum molding process, which eliminates the need for mold opening, saves costs, has low production costs, reduces the risk of mass production, and shortens the research and development cycle. The lithium battery box is made of fire-resistant and flame-retardant ABS material, which has high safety performance and fire resistance. flame retardant, high processing precision and small tolerances, effectively ensuring stable battery installation.

The lithium battery box is made of ABS, with a processing accuracy of up to 0.02mm, and a reasonable design to ensure that the battery is easy to pick up and place, and there should be no jamming (caused by the battery box being too small) or poor contact (the battery box is too large).

(1) It is convenient to take in and out the battery, and there should be no jamming (caused by the battery box being too small) or poor contact (the battery box being too large);
(2) There are "+, -" pole placement marks in the battery box, and they can prevent reverse installation, that is, the battery cannot be connected after it is installed upside down;
(3) The electrode sheet should maintain sufficient elasticity, and the rebound distance should not be less than 5mm;
(4) The battery box door cannot be separated from the entire product when in use;
(5) It is required to swing up and down and left and right 12 times after placing the battery. There should be no bad contact and the battery box door should not fall off on its own;
(6) No leakage of electricity, that is, after placing any battery, use a straight wire of any length without size requirements from any angle, and the positive and negative electrodes of the battery cannot be directly short-circuited in any way. ;
(7) It cannot be bridged by straight steel needles with a diameter of 0.5mm and a length of at least 25mm;
(8) The battery box should have the following signs: proportional battery shape, voltage, polarity, battery specifications, etc.;
(9) For battery toys with replaceable batteries, how to take out and install the battery can be illustrated with diagrams.